Platform Stage Supports | Supports For Sale

SC9600 Bridge Support

The SC9600 Bridge Support System “bridges” platforms from right to left and front to back. The SC9600 Bridge Support System consists of two end frames that lock together with both horizontal and diagonal snap bracing. Also included are four top plates in single, dual or quad node design. The SC9600 is available in fixed or adjustable heights and in two versions: Arena style and All-terrain style. The Arena style SC9600 adjusts with interior tubes that telescope upward from the top of the frame. This design allows the platform height to be adjusted quickly, often with the frames still in place. The All-terrain style SC9600 is great for outdoor use on uneven ground. The interior tubes, which telescope downward from the bottom of the frame, allow each of the legs to be set at different heights.

The SC9600 Bridge Support System is used with SC90 and SC97 Platforms and complies with the following:

Adjustable heights: 24 inches – 36 inches (610mm – 914mm), 36 inches – 54 inches (914mm – 1372mm), 48 inches – 76 inches (1219mm – 1930mm)
Adjust course height by 4 inch (102 mm) increments using a 5/8 inch (16mm) locking pin. Allow 3 inches (76mm) additional fine height adjustment through use of integral acme thread adjustable screw foot
Capable of being erected without use of tools

Product Sheet CAD Download Product Page

SC90® Fixed Height Leg

Our SC90® Leg Supports, used with the SC90 and SC97 Platforms, guarantee maximum durability and strength; the leg supports feature the same high quality aluminum that is used on our platforms. The leg supports are available in both fixed and adjustable heights, and have bracing and leg clamps available for extra stability and rigidity at higher elevations. In addition, our leg supports can be used with the most challenging custom applications on stages, seating and choral riser systems.

Staging Concepts Fixed Height Stair Units attach easily to SC90® and SC97 Platforms with no loose parts or special tools.

Finish: Black powder coat and mill aluminum
Attachment: Equip stair system with locking mechanism to allow for attachment to side of platform
Width: 3 feet (914mm) or 4 feet (1220mm) wide
Tread Surface: Black polypropylene material or match platform surface
Handrail finish: mill aluminum, black powder coat, silver powder coat, black anodize, or clear anodize

Product Sheet CAD Download Product Page

SC90® Adjustable Height Leg

The SC90® Adjustable Leg Supports, used with the SC90 and SC97 Platforms, have bracing and leg clamps available for extra stability and rigidity at higher elevations. They can be used with the most challenging custom applications on stages and seating riser systems.

The SC90® Adjustable Height Leg Supports are for use with both SC90 and SC97 Platforms.

Available heights from 4” to 96” (bracing required above 30”)
Legs: Constructed by sleeving two legs together with intermittently spaced holes. Align holes with a fast pin for quick height changes. Join leg to platform in a compression loading condition. Hold in place by eye-bolt.
Terminate each leg with a non-marring leveling foot to allow for 1 ½ inches (38mm) of fine adjustment. Fabricate foot from molded skid-resistant PVC pad.
Optional storage clips are available for leg storage under the platforms.
Capable of being erected without use of tools
Finish: Mill finish aluminum

Product Sheet CAD Download Product Page

SC100 Folding Bridge Frame

SC100 Folding Bridge Frame, also referred to as a C-Frame, is a functional frame that provides bridging between platforms. The frame, which is available in fixed and adjustable heights, folds flat and is also self-contained. Custom sizes are available and allow you to use the SC100 with the SC90 Single Side Platform or the SC97 All-Aluminum Platform.

The SC100 Folding Bridge Frame is used with SC90 and SC97 Platforms. Design support system using DOM or ERW steel tubing and comply with the following:

Adjustable heights: 16″-22″ (406mm – 559mm), 18″-24″ (457mm – 610mm), 24″-36″ (610mm – 914mm), 32″-42″ (802mm-1066mm), 36″-48″ (914mm – 1219mm)
Adjust course height by 2 inch (51mm) increments using a 3/8 inch (10mm) locking pin. Allow 2 inches (51mm) additional fine height adjustment through use of integral acme thread adjustable screw foot
Capable of being erected without use of tools
Finish: Black powder coat

Product Sheet CAD Download Product Page

SC2000 Seating Riser Support

The SC2000 Seating Riser is perfect for facilities that have flexible seating needs.

The key features of the SC2000 are its quick setup, flexible configurations, and compact storage. The understructure unfolds like an accordion and expands to fill the designated space. Only two people are required for setup and custom sizes are available to fit into even the most unusual spaces. When you don’t need the additional seating, the SC2000 folds into 15% of its expanded size and easily rolls away on retractable casters for storage. The SC200 is designed for use with SC90 and SC97 platform/decks.

The SC2000 Seating Riser Understructure is for use with SC90 and SC97 Platforms, designed to permit bridging of platforms between understructures, and to comply with the following:

3 inch (76mm) fine adjustment through use of integral acme thread adjustable screw foot. Mount screw foot to bottom of main vertical members.
Capable of being erected by two people without use of tools and must fold to a fraction of the space of overall length
Finish: Powder coat black

Product Sheet Product Page

SC2003 Rolling Stage

The SC2003 Rolling Stage has a retractable caster assembly so that it can roll across a flat floor while completely assembled. The stage consists of a support structure and three 4′x8′ SC90 Platforms, creating an 8′x12′ area. Multiple rolling stages can bridge SC90 Platforms to create a larger performance area. When not in use, the support frames can be used as a deck storage. Customization available upon request.

The SC2003 Rolling Stage understructure is used with SC90 and SC97 Platforms, is designed to permit bridging of platforms between supports, and complies with the following:

Adjustable heights: 36 inch – 50 inch (914mm – 1270mm) and 48 inch – 72 inch (1219mm – 1829mm). Inquire for custom height adjustability.
Adjust course height by 4 inch (102mm) increments using a 5/8 inch (16mm) locking pin. Allow 3 inches (76mm) additional fine height adjustment through use of integral acme thread adjustable screw foot
Capable of being erected without use of tools.

Product Sheet CAD Download Product Page